- 2024 YEARS
-
Design of dissimilar material joint for defect-free multi-material additive manufacturing via laser-directed energy deposition. Heliyon, Elsevier BV, 2024-04
권 10 호 8 페이지 29666 ~ 29680
공동저자정보 -
Er 합금 원소 첨가를 통해 인장 물성과 절삭성이 우수한 Ti 합금 개발. 대한금속·재료학회지, 대학금속재료학회, 2024-03
권 62 호 3 페이지 171 ~ 179
공동저자정보 -
Origin of the enhanced pseudo-elasticity of additively manufactured Fe-17Mn-5Si-4Ni-10Cr-(V, C) shape memory alloy fabricated by laser powder bed fusion. JOURNAL OF ALLOYS AND COMPOUNDS, ELSEVIER SCIENCE SA, 2024-03
권 976
공동저자정보 -
Laser Rescanning for Enhancing Mechanical Properties of Laser-Directed Energy-Deposited High-Manganese Steels. MICROMACHINES, MDPI AG, 2024-02
권 15 호 2 페이지 176 ~ 187
공동저자정보 -
Effect of Mn Content on Microstructure and Mechanical Properties of Fe-Mn-Cr-C High-Manganese Steels Produced Using Laser-Directed Energy Deposition. STEEL RESEARCH INTERNATIONAL, VERLAG STAHLEISEN MBH, 2024-02
권 95 호 1 페이지 2300492 ~ 2300502
공동저자정보 -
Highly Sensitive Soft Pressure Sensors for Wearable Applications Based on Composite Films with Curved 3D Carbon Nanotube Structures. SMALL, WILEY-V C H VERLAG GMBH, 2024-01
권 20 호 2 페이지 2303981 ~ 2303992
공동저자정보
-
- 2023 YEARS
-
Effects of heat source type and FE time discretization strategy on predicting temperature histories during laser direct energy deposition process of Fe-based alloys. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, SPRINGER-VERLAG LONDON LTD, 2023-12
권 129 호 11-12 페이지 4845 ~ 4867
공동저자정보 -
Effects of laser rescanning on microstructure and mechanical properties of Al-10Si-1Mg alloy produced by laser-directed energy deposition. MATERIALS TODAY COMMUNICATIONS, ELSEVIER, 2023-12
권 37 페이지 106979 ~ 106989
공동저자정보 -
L-DED 공정으로 제조된 AISI 316L 스테인리스 스틸의 적층 형상 및 특성에 미치는 공정 변수의 영향. 대한금속·재료학회지, 대학금속재료학회, 2023-10
권 61 호 10 페이지 760 ~ 771
공동저자정보 -
레이저 직접 적층 공정으로 제조된 Inconel 625 초합금의 미세구조및 기계적 특성에 공정 변수 및 스캔 전략이 미치는 영향. 대한금속·재료학회지, 대학금속재료학회, 2023-10
권 61 호 10 페이지 772 ~ 784
공동저자정보 -
Fabrication of FeMnSi-based shape memory alloy components with graded-microstructures by laser powder bed fusion. Additive Manufacturing, Elsevier, 2023-09
권 78 페이지 103835
공동저자정보 -
Influence of Several Heat Treatments on Residual Stress in Laser Powder Bed-Fused Maraging 18Ni-300 Steel. APPLIED SCIENCES-BASEL, MDPI AG, 2023-05
권 13 호 11
공동저자정보 -
Phenomenological Modeling of Distortions and Residual Stresses in Direct Energy Deposition of AISI M4 High Speed Tool Steel on D2 Substrate. METALS AND MATERIALS INTERNATIONAL, KOREAN INST METALS MATERIALS(대한금속.재료학회), 2023-05
권 29 호 1 페이지 1399 ~ 1420
공동저자정보 -
Shape memory and mechanical properties of a Fe-Mn-Si-based shape memory alloy: Effect of crystallographic texture generated during additive manufacturing. MATERIALS & DESIGN, ELSEVIER SCI LTD, 2023-05
권 229
공동저자정보 -
Effect of direct aging on microstructure, mechanical properties and shape memory behavior of Fe-17Mn-5Si-10Cr-4Ni-(V, C) shape memory alloy fabricated by laser powder bed fusion. MATERIALS CHARACTERIZATION, ELSEVIER SCIENCE INC, 2023-03
권 197
공동저자정보
-
- 2022 YEARS
-
Shape Recovery and Mechanical Properties of Hot-Rolled Fe–17Mn–5Si–5Cr–4Ni–0.1C–0.2Ti Shape Memory Alloy for Linear Actuator Application. PHYSICS OF METALS AND METALLOGRAPHY, INTERPERIODICA, 2022-12
권 123 호 14 페이지 1461 ~ 1470
공동저자정보 -
Simulation of annealing process on AISI 316 L stainless steel fabricated via laser powder bed fusion using finite element method with creep. Additive Manufacturing, Elsevier, 2022-12
권 60 페이지 103255 ~ 103265
공동저자정보 -
Control of microstructure and shape memory properties of a Fe-Mn-Si-based shape memory alloy during laser powder bed fusion. Additive manufacturing letters, Amsterdam: Elsevier B.V., 2022-12
권 3 페이지 100091 ~ 100098
공동저자정보 -
Influence of Post Heat Treatment Condition on Corrosion Behavior of 18Ni300 Maraging Steel Manufactured by Laser Powder Bed Fusion. MICROMACHINES, MDPI AG, 2022-11
권 13 호 11 페이지 1977 ~ 1989
공동저자정보 -
Corrosion Resistance of Laser Powder Bed Fused AISI 316L Stainless Steel and Effect of Direct Annealing. MATERIALS, MDPI, 2022-09
권 15 호 18 페이지 6336 ~ 6347
공동저자정보 -
Shape recovery performance of a (V, C)-containing Fe-Mn-Si-Ni-Cr shape memory alloy fabricated by laser powder bed fusion. JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMRT, ELSEVIER, 2022-09
권 20 페이지 3969 ~ 3984
공동저자정보 -
Effect of post-heat treatment conditions on shape memory property in 4D printed Fe–17Mn–5Si–10Cr–4Ni shape memory alloy. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, ELSEVIER SCIENCE SA, 2022-09
권 852 페이지 143689 ~ 143700
공동저자정보 -
Mechanical properties and wear resistance of direct energy deposited Fe-12Mn-5Cr-1Ni-0.4C steel deposited on spheroidal graphite cast iron. JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMRT, ELSEVIER, 2022-07
권 19 페이지 3484 ~ 3497
공동저자정보 -
Analysis of solidification microstructure and cracking mechanism of a matrix high-speed steel deposited using directed-energy deposition. JOURNAL OF ALLOYS AND COMPOUNDS, ELSEVIER SCIENCE SA, 2022-07
권 907 호 1 페이지 164523 ~ 164532
공동저자정보 -
Irregular Microdome Structure-Based Sensitive Pressure Sensor Using Internal Popping of Microspheres. ADVANCED FUNCTIONAL MATERIALS, WILEY-V C H VERLAG GMBH, 2022-05
권 16 호 32 페이지 2201147 ~ 2201158
공동저자정보 -
Finite Element Analysis of Reinforced Concrete Beams Prestressed by Fe-Based Shape Memory Alloy Bars. APPLIED SCIENCES-BASEL, MDPI AG, 2022-04
권 12 호 7 페이지 3255 ~ 3277
공동저자정보 -
3D and 4D Printing of Complex Structures of Fe-Mn-Si-Based Shape Memory Alloy Using Laser Powder Bed Fusion. ADVANCED MATERIALS INTERFACES, WILEY, 2022-04
권 9 페이지 2200171 ~ 2200181
공동저자정보
-
- 2021 YEARS
-
Size effect due to contour laser scanning in 316L stainless steel produced by laser powder bed fusion. JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMRT, ELSEVIER, 2021-11
권 15 페이지 5554 ~ 5568
공동저자정보 -
Wear resistance of direct-energy–deposited AISI M2 tool steel with and without post-heat treatment. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, SPRINGER-VERLAG LONDON LTD, 2021-10
권 116 호 11-12 페이지 3917 ~ 3931
공동저자정보 -
Formation of metastable bcc-δ phase and its transformation to fcc-γ in laser powder bed fusion of Fe–Mn–Si shape memory alloy. JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMRT, ELSEVIER, 2021-09
권 14 페이지 2782 ~ 2788
공동저자정보
-
- 2011 YEARS
-
Ni-B 분말의 기계적 합금화 과정에서 밀링시간에 따른 미세조직과 상변화 거동. 한국분말야금학회지, 한국분말야금학회, 2011-12
권 18 호 6 페이지 496 ~ 501
공동저자정보 -
Effect of SiC Particle Size on Wear Properties of Al2O3.SiO2/SiC/Mg Hybrid Metal Matrix Composites. TRIBOLOGY LETTERS, PLENUM PUBLISHERS, 2011-12
권 111 호 111 페이지 1 ~ 5
공동저자정보 -
FABRICATION AND THERMAL EXPANSION BEHAVIOR OF A MAGNESIUM-MATRIX COMPOSITE WITH A HIGH CONTENT OF REINFORCING SiC PARTICLES. MECHANICS OF COMPOSITE MATERIALS, CONSULTANTS BUREAU, 2011-09
권 47 호 4 페이지 427 ~ 434
공동저자정보 -
다단계 냉간 압연된 고탄소강 와이어의 미세조직 및 기계적 특성에 미치는 패스스케줄의 영향. 한국재료학회지, 한국재료학회, 2011-06
권 21 호 6 페이지 320 ~ 326
공동저자정보 -
Effect of crucible geometry on melt convection and interface shape during Kyropoulos growth of sapphire single crystal. JOURNAL OF CRYSTAL GROWTH, ELSEVIER SCIENCE BV, 2011-06
권 324 호 1 페이지 248 ~ 254
공동저자정보 -
The effect of reinforcement clustering on the steady-state creep behaviors of discontinuous metal matrix composite: A possible origin of 'anomalously high' stress exponent. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, ELSEVIER SCIENCE SA, 2011-05
권 528 호 13-14 페이지 4564 ~ 4568
공동저자정보 -
FINITE-ELEMENT MODELING OF THE PARTICLE CLUSTERING EFFECT IN A POWDER-METALLURGY-PROCESSED CERAMIC-PARTICLE-REINFORCED METAL MATRIX COMPOSITE ON ITS MECHANICAL PROPERTIES. MECHANICS OF COMPOSITE MATERIALS, CONSULTANTS BUREAU, 2011-01
권 46 호 6 페이지 639 ~ 648
공동저자정보
-
- 2010 YEARS
-
Direct numerical predictions for the steady-state creep deformation of extruded SiCw/Al6061 composites using a representative volume element with random arrangement of whiskers. COMPUTATIONAL MATERIALS SCIENCE, ELSEVIER SCIENCE BV, 2010-06
권 48 페이지 802 ~ 812
공동저자정보 -
Analysis of 3D Random Al18B4O33 Whisker Reinforced Mg Composite Using FEM and Random Sequential Adsorption. MATERIALS TRANSACTIONS, JAPAN INST METALS, 2010-06
권 51 호 6 페이지 1089 ~ 1093
공동저자정보 -
Analysis of Effective Elastic Modulus and Interfacial Bond Strength of Aluminum Borate Whisker Reinforced Mg Matrix Composite by Using Three Dimensional Unit Cell Model. 대한금속.재료학회지, 대학금속재료학회, 2010-05
권 48 페이지 469 ~ 475
공동저자정보
-
- 2009 YEARS
-
Finite-element analysis of deformation behaviors in random-whisker-reinforced composite. SCRIPTA MATERIALIA, PERGAMON-ELSEVIER SCIENCE LTD, 2009-09
권 61 페이지 580 ~ 583
공동저자정보 -
Thermal Fatigue Cracking and Extension Behaviors of Squeeze Infiltrated Al18B4O33/Mg Functionally Graded Materials. MATERIALS TRANSACTIONS, JAPAN INST METALS, 2009-04
권 50 페이지 864 ~ 871
공동저자정보 -
FABRICATION AND RESIDUAL STRESS CHARACTERIZATION OF SQUEEZE INFILTRATED Al18B4O33/Mg FUNCTIONALLY GRADED MATERIAL. INTERNATIONAL JOURNAL OF MODERN PHYSICS B, WORLD SCIENTIFIC PUBL CO PTE LTD, 2009-03
권 23 페이지 1485 ~ 1490
공동저자정보
-
- 2008 YEARS
-
A study on the thermal fatigue properties of Mg/Mg-Al18B4O33 functionally graded material by thermal cycling test and finite element method. 대한금속.재료학회지, 대학금속재료학회, 2008-08
권 46 페이지 538 ~ 544
공동저자정보 -
Thermal residual stress investigation in AS52/Al18B4O33 magnesium matrix composite by thermal cycling test. Archives of Materials Science and Engineering, World Academy of Materials and Manufacturing Engineering, 2008-07
권 32 호 1 페이지 17 ~ 20
공동저자정보 -
Effect of Sb Addition on Microstructure and Mechanical Properties of Al18B4O33/AS52 Magnesium Matrix Composites. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, JOURNAL MATER SCI TECHNOL, 2008-01
권 24 호 1 페이지 99 ~ 101
공동저자정보
-